DisplayLink Feature Suggestions
- or
362 results found
-
Ashes of Creation Fast Leveling Guide
Leveling in Ashes of Creation is not meant to be rushed mindlessly, but if you play smart, you can absolutely stay ahead of the curve. This Ashes of Creation fast leveling guide is written from the perspective of someone who has spent years grinding MMOs the hard way. The goal here is simple. Less wasted time, more meaningful progress, and a smoother path to higher levels.
If you are short on time and want to remove some of the early grind pressure, some players choose to use SSEGold to buy Ashes of Creation gold ( https://www.ssegold.com/ashes-of-creation-gold ) so they can focus on leveling and gearing instead of farming currency. Used responsibly, it can help you keep momentum without burning out early.
Understand How Leveling Really Works
Ashes of Creation leveling is built around multiple systems working together. Mob grinding is the backbone, but quests, exploration, and group play all feed into your experience gain. If you try to rely on just one method, leveling will feel slow and frustrating.
The fastest way to level in Ashes of Creation is combining efficient mob grinding with smart quest routing. You want to be killing things constantly while turning in objectives along the way. Downtime is the real enemy here.
Best Early Leveling Strategy
Early levels are about momentum. Do not overthink builds at level one. Focus on abilities that give sustain or area damage. Self healing, shields, or cleave attacks reduce downtime and speed everything up.
Stick to mobs close to your level. Enemies that are slightly below you die faster and still give solid XP. Fighting mobs that are too high level slows you down and increases death risk, which kills efficiency.
Always grab nearby quests, but do not chase objectives across the map unless they overlap with your grind path. Quests are XP bonuses, not the main course.
Mob Grinding Is King
If you want fast leveling in Ashes of Creation, mob grinding is non negotiable. High density areas with fast respawn rates are where you should live.
Look for zones with tightly packed enemies and predictable patrols. Pulling two or three mobs at once is often faster than single target fighting, especially if your class has AoE or cleave abilities.
As you level, move zones frequently. Out leveling a zone means weaker XP returns. A good rule is to change farming spots every few levels to keep XP rates high.
Grouping Can Speed Things Up
Solo leveling is reliable, but small groups can be even faster when done right. Two or three players with good synergy can clear mobs faster than solo players and still earn solid experience.
The key is role balance. A tanky frontliner with a damage dealer and light support can grind nonstop with almost no downtime. Avoid large groups early, as XP splits can reduce efficiency.
If you find a good group, stick with it for a while. Consistency matters more than chasing perfect XP numbers.
Choose the Right Class for Fast Leveling
Some classes simply level faster than others. Classes with sustain, mobility, or AoE damage have a clear advantage.
Fighters and Bards level smoothly thanks to survivability and steady damage. Mages excel when they can safely use area damage. Rangers level quickly in open zones but require good positioning. Clerics are slower but extremely safe.
No class is unplayable, but if your goal is speed, prioritize sustain over raw damage.
Smart XP Tips That Add Up
Small decisions make a big difference over time. Always keep your gear updated. Even minor upgrades reduce kill time. Use consumables when grinding tough packs. Dying costs more time than potions ever will.
Keep your inventory clean so you do not have to stop mid grind. Learn mob spawn timers and rotate camps efficiently. When a zone is crowded, move on instead of fighting for spawns.
Exploration XP and side activities also add up. Grab them when convenient, not as a main focus.
Final Thoughts on Fast Leveling
Ashes of Creation rewards players who plan ahead and respect the grind. This Ashes of Creation fast leveling guide is not about rushing blindly. It is about playing efficiently and staying consistent.
Focus on steady progress, minimize downtime, and adapt as the world changes. If you do that, you will hit higher levels faster without burning yourself out. Leveling smart now sets the foundation for everything that comes later in Ashes of Creation.
Leveling in Ashes of Creation is not meant to be rushed mindlessly, but if you play smart, you can absolutely stay ahead of the curve. This Ashes of Creation fast leveling guide is written from the perspective of someone who has spent years grinding MMOs the hard way. The goal here is simple. Less wasted time, more meaningful progress, and a smoother path to higher levels.
If you are short on time and want to remove some of the early grind pressure, some players choose to use SSEGold to buy Ashes of Creation gold ( https://www.ssegold.com/ashes-of-creation-gold ) so they can…
1 vote -
Need some Advice about possibly switching from MacOS to Linux
I have been a long term user of MacOS for years. Main reason why I came to MacOS years ago was I grew tired of Windows 11 and Microsoft in general. However lately I've found myself annoyed with Apple's restrictions. I can't run some games I want to play on it due to the fact that I have an M4 which isn't compatible with Dual booting with either Windows or Linux natively on bare metal grow a garden. I can't install some apps and stuff in VM's due to the fact that it needs the ARM versions of everything which not every app, etc is supported, and my hard drive is so small I can't do anything too big with it, and I don't want to buy an external drive just for VM.
So I am thinking about transferring from MacOS to Linux, by possibly buying a mini PC and moving to it.
I've tried Ubuntu and Linux Mint in the past. Not a fan of Linux Mint, however Ubuntu is a possibility due to the ease of use but I am open to discussing other versions of Linux. I've played around with Ubuntu a bit in VM and I do like the layout of it, but some of the limitations of using it in the VM is notable.
One thing I would need to do, if I am to switch systems at some point in the future is have a way to transfer all my passwords, files, etc to the new system. How would I do that? What advice would people here have for me?
I have been a long term user of MacOS for years. Main reason why I came to MacOS years ago was I grew tired of Windows 11 and Microsoft in general. However lately I've found myself annoyed with Apple's restrictions. I can't run some games I want to play on it due to the fact that I have an M4 which isn't compatible with Dual booting with either Windows or Linux natively on bare metal grow a garden. I can't install some apps and stuff in VM's due to the fact that it needs the ARM versions of everything…
1 vote
527 results found
-
Displaylink app android
Dsplaylink app on android suggerencies.
-that it could be forced to change the resolution to 720p or 1080p and/or hz when you project the screen to the tv. As it would help users who don't have much performance on their phone for apps or FPS games.
6 votes -
354 votes
-
Close out old tickets in this feature suggestion portal; merge duplicates
There seem to be some old open requests from previous years that are still open. It'd be great to see those archived so folks can focus their votes/points on valid entries.
3 votes -
CPU priority of Displaylink's driver process should be set Higher
Whatever [DisplayLinkManager.exe] or [WUDFHost.exe], when the driver starts it should be set the priority at least to [Above normal], it is really helpful for fixing the laggy problem. Now I only can do it maunally.
4 votes -
Windows 11 : with latest nvidia drivers, monitos does not work.
Hi, it's Emir
Firstly, my setup :
"monster" make "monster tulpar t7 v21.7" gamin laptop
RTX 3060 Notebook gpu
GQeem T4801 docking station
"monster" make "aryond" two monitors.Secondly, the problem :
I have been using windows 10 on my operating system. And everything was just fine with it. Than, i need to switch to windows 11, and here it goes.
With windows 11, there was no any problem at the first, but after a certain nvidia driver versions, i just can not use my monitors. I have to use the roll back driver and it is "512", otherwise all other latest drivers creating a problem with my displaylink setup.Third, what I did :
I have tried to get contact with microsoft and nvidia about this problem. But there is no solution or answer.
I have tried lots of drivers from displaylinks download page, none of them worked.
I have tried to update my system in case of any driver to most up to date version, but problem still occurs.
I have tried to format.If you could help me, I would be glad to see that.
Hi, it's Emir
Firstly, my setup :
"monster" make "monster tulpar t7 v21.7" gamin laptop
RTX 3060 Notebook gpu
GQeem T4801 docking station
"monster" make "aryond" two monitors.Secondly, the problem :
I have been using windows 10 on my operating system. And everything was just fine with it. Than, i need to switch to windows 11, and here it goes.
With windows 11, there was no any problem at the first, but after a certain nvidia driver versions, i just can not use my monitors. I have to use the roll back driver and it is "512", otherwise all…3 votes -
Night shift and True tone on macOs
I think it's a big miss not to have Night shift and True tone.
For those who have an external monitor without a brightness sensor or want the same colors as the internal monitor.
Working at night is difficult without this feature.Please add support for these functions for MacOs
31 votes -
Publish DisplayLink Android app in the Sunmi App store
Sunmi has it's own app store (https://www.sunmi.com/en-US/appstore/) with lot's of apps. The sunmi devices have a wide range of business devices (point of sale, signature).
It would be great, if there is a official DisplayLink available. Currently there is only a unfficial app available and not available for all devices.
3 votes -
6 votes
-
Enable Driver update Automatically even when a dock is not connected.
I manage a large Windows 10 client environment. We like to keep drivers up to date. When i connect to a displaylink (DL) dock i want the latest driver already there. This is not how it works today in my understanding.
Today when a pc makes connection to a DL dock the driver is enabled and if windows update happens to come along and check for updates it will update your DL Driver. assuming there a newer driver available and driver updates is enabled.What if i didn't need to wait for windows update. Why can't have a scheduled task that checks daily, weekly, monthly, or at a time of my choice?
What is this key and what happens when i set it to yes?
[HKEYLOCALMACHINE\SOFTWARE\DisplayLink\Products\DefaultProduct\Capabilities]
"AutomaticUpdates"="no"I manage a large Windows 10 client environment. We like to keep drivers up to date. When i connect to a displaylink (DL) dock i want the latest driver already there. This is not how it works today in my understanding.
Today when a pc makes connection to a DL dock the driver is enabled and if windows update happens to come along and check for updates it will update your DL Driver. assuming there a newer driver available and driver updates is enabled.What if i didn't need to wait for windows update. Why can't have…
4 votes -
Add Network detection like Kensington DockWorks
Please add network settings to Display-Link Software, so that Kensington DockWorks functionality is available for all Docking Stations:
- disable WiFi when connecting to a Docking Station with Ethernet Connection
- Passthrough MAC-Adress from the WiFi-Adpter to the Eth-Adapter in the Dock, so that the same IP-Adress can be used and all network cennections don't need to be reconfigured
- Enable WiFi again when Dock is disconnected
3 votes -
Interface dex mode deskop and hz.
That the app had its own desktop interface (as does Samsung's dex mode or Motorola's ready for)
In addition to that, it would also be good to implement changing the resolution to HD or Full HD.
or 30 or 60 hz change
(for games mostly)3 votes -
Add support for 3840 x 2560 resolution
I am using two Huawei MateView monitors in dualsetup under macOS Monterey and need support for their 3840 x 2560 (1920 x 1280 HiDPI) resolution.
60 votes -
Icon following macOS Big Sur and later guidelines
Since macOS Big Sur, Apple recommends a square shape for icons instead of the round shape of previous versions.
Is it possible to upgrade your icon ?1 vote -
Display-link drivers breaks network connection
Hey guys,
I'm facing an weird issue while I'm using the model-6950z.
Somehow my Wi-Fi drivers stops to work =/
I'm currently using the latest version of the drivers.
has someone faced this issue?1 vote -
matlab on Mac won't boot up if I use display link dock station
Matlab stuck on the initial page and freeze, unless I unplug the station and re-open Matlab. Basically if station is plugged in then Matlab won't boot up.
3 votes -
For batter performance, I suggest that Enable Recognized resolution 5120 X 2880 when choose the 2560x1440 Hidpi Resolution. Currently,
For batter performance, I suggest that
Enable Recognized resolution 5120 X 2880 when choose the 2560x1440 Hidpi Resolution.
Currently, when Using HIDPI Mode , It recognized 6016X3384 resolution on Mac info, regardless of when choose 3008x1692 or 2560x1440(looks like)
It make Low Performance on overall Mac.
Thanks for reading. :)
3 votes -
Night shift on OSX for external monitors
Please get night shift and/or flux working on external displays.
39 votes -
Make it compatible with resolution 1720 x 1440
I have a Philips screen with the resolution 3440 x 1440. It has the capability to use "Picture By Picture (PBP)" in which you can use two connections and split the screen in half. Then the resolution is 1720 x 1440 for each screen. My Macbook Pro M1 recognizes the resolution natively on one half of the screen, but on the other half the Displaylink does not render the resolution correctly.
9 votes -
switch synch rate 30 -> 60
I found this fixed my issue. The resolution was 4k'is and refresh rate was 30hz. I suspect this is due to limited resources based on my particular hardware setup. In any case switching from 30hz to 60hz also reduced the resolution to half of what it was. This was a win-win in my case as I didn't need/want 4k. I do have a pretty old machine and I am pumping this all through USB3 so probably a resource issue and then the slow refresh confused my considerably, compared to PC, newer HDMI --> TV <-- . Forgot to add, I am using a TV. I also tried configuring my TV HDMI input to allow for slower synch but that did not resolve the issue when using 30hz. Good luck! Edit: This was with Windows 10.
I found this fixed my issue. The resolution was 4k'is and refresh rate was 30hz. I suspect this is due to limited resources based on my particular hardware setup. In any case switching from 30hz to 60hz also reduced the resolution to half of what it was. This was a win-win in my case as I didn't need/want 4k. I do have a pretty old machine and I am pumping this all through USB3 so probably a resource issue and then the slow refresh confused my considerably, compared to PC, newer HDMI --> TV <-- . Forgot to add, I…
1 vote -
Provide DisplayLink driver for Yocto. I can live with compiled lib
Having DisplayLink over USB for embedded ARM would simplify headless operation
4 votes
- Don't see your idea?