The new estimate of delivery for f.lux, night mode, and monitor calibration on Windows 10 Creators Update onwards is for release 9.0, planned before the end of 2018. When a 9.0 Alpha or Beta is issued, you will be able to try the feature on products based on the DL-3000, DL-5000 and DL-6000 series ASICs.

f.lux has enabled some support for DisplayLink indirect displays (Windows 10)
You can download f.lux from https://justgetflux.com/

A team has been allocated and is assessing the work for Windows 10 Creators Update onwards.
When a new estimate is available, I will be able to share an estimated delivery date.

f.lux has enabled some support for DisplayLink indirect displays (Windows 10)
You can download f.lux from https://justgetflux.com/

For the few wanted to do real monitor calibration, please contact technical_enquiries@displaylink.com to discuss how to enable this on your particular configuration, if that could work today.

f.lux latest releases have enabled support for DisplayLink indirect displays (Windows 10)
You can download f.lux from https://justgetflux.com/

For the few wanted to do real monitor calibration, please contact technical_enquiries@displaylink.com to discuss how to enable this on your particular configuration.

f.lux latest releases have enabled support for DisplayLink indirect displays.
You can download f.lux from https://justgetflux.com/

For the few wanted to do real monitor calibration, please contact technical_enquiries@displaylink.com to discuss how to enable this on your particular configuration.

The testing of the release has shown a few important flaws in both the implementation of Windows 7 and Windows 10. Unfortunately, this means the feature is far from being good enough to release in 8.3. Work continues on top of finding out why the flaws were found so late in the development.

The 1st two product line implementation is now complete. You can now try 8.3 Alpha 1 to send your feedback if you use a product based on DL-3000 and DL-5000 series:
http://www.displaylink.org/forum/showthread.php?p=83604

Delivery is forecasted between end of July, early August for DL-3000 and DL-5000 on Windows 7, 8, 8.1, 10TH1, 10TH2, Creators Update and Fall Creators Update.
DL-6000 series based products are next in implementation.

The implementation progresses. The first products we are working on are the DL-3000 and DL-5000 series and you can have an early preview on Windows 10 Creators Update onwards for these devices: http://www.displaylink.org/forum/showthread.php?p=82958#post82958

Please do read the limitations before you start using it and use the forum for the feedback so it can be individually tracked and answered to.

Delivery if forecasted between end of July, early August for DL-3000 and DL-5000 on Windows 7, 8, 8.1, 10TH1, 10TH2, Creators Update and Fall Creators Update.

The implementation progresses. The first products we are working on are the DL-3000 and DL-5000 series and you can have an early preview on Windows 10 Anniversary Update onwards for these devices: http://www.displaylink.org/forum/showthread.php?p=82958#post82958

Still a lot of work to do… Please do read the limitations before you start using it and use the forum for the feedback so it can be individually tracked and answered to.

Now the analysis for the feature has completed, the implementation has started. Contrast and brightness are already supported through DDC/CI and we are now developing gamma curve modification. The first products we are working on are the DL-3000 and DL-5000 series.

This is planned. It has taken longer than hoped as we have been working with Microsoft to better integrate DisplayLink graphics into Windows 10, which has changed the interfaces we use. This new interface can be seen today with WIndows Insider builds and DisplayLink’s 8.0 software.

We do not want to develop this feature until this new Windows interface development is completed.

This feature is on our backlog of Windows features to add.