The process of building a setup using my M1 MacBook Air
I’m in the process of building a setup using my M1 MacBook Air, and I want to make it as clean and functional as possible. My plan is to connect a DisplayLink adapter to a USB-C hub, which I would then connect to my laptop using a USB-C extender. The idea behind using the extender is to position the hub in a more convenient location and reduce cable clutter, giving my workspace a tidier appearance.
However, I’ve never set up a configuration like this before, so I’m not entirely sure if it will work as I’m envisioning it. I’m wondering whether the combination of the DisplayLink adapter, hub, and USB-C extender will function properly with the M1 MacBook Air, or if there might be any issues with connectivity, bandwidth, or performance.
Could someone with experience in setups like this advise me on whether this plan is feasible, and if there are any potential pitfalls I should be aware of? Any guidance would be greatly appreciated.
Last edited by skeletal shenanigans two days ago
Gregory Cole
shared this idea
-
Saimon Blackers commented
Great thread - when you're documenting an M1 MacBook + DisplayLink setup, using a clear checklist and step-by-step format makes troubleshooting and reproduction much easier. I found this guide helpful as an example of concise structure and formatting: https://tabulera.com/blog/do-part-time-employees-get-benefits-guide-for-employers. Adopting a similar layout (requirements, steps, common issues) could make your setup instructions much more accessible to others.