Fix some applications not running on laptop GPU
Hi since the Windows 10 Anniversary update games or utilities i have in Steam valve dont seem to use the GPU on my laptop but instead use intel graphic the laptop i have is a Lenovo Y50
Marking completed with Windows 10 v1903 with KB4512941 (OS Build 18362.329) or newer (end of August 2019 patch).
Thank you all for confirming and your patience.
Should anyone see something unusual, please create a support ticket for individual investigation.
I appreciate your work.
Hey @alban , i'm using OS Build 18362.592 and i have Nvidia 960m so still can't find a way to use my dedicated graphic card effectivly. I've selected nvidia gpu for all applications from nvidia control panel but still low fps. Even i try right click , run with gpu , select nvidia still low fps. Are you sure this problem is solved? What am i doing wrogn?
Unfortunately Microsoft's implementation of multi GPU handling is, quite frankly, piss poor - and I am still unable to use my D6000 effectively.
Not only do I have to define each application I want to use with my high performance GPU, however whatever way the D6000 and Windows are talking to each other, Nvidia's control panel informs me that it cannot open because I don't have a display connected with an Nvidia GPU.
The issue seems twofold here - one being that Microsoft do not allow a system-wide declaration of "Use my good GPU", and secondly I need to have a display physically connected to my laptop for Nvidia to consider the GPU to be connected.
I've once again had to revert to a HDMI cable directly connected to the laptop to get more than 10FPS in my games sadly :-(
I'm using 18362.356 but I'm still having this issue... My nvidia card is not used... but it should.
Hey @alban when i open a game in my computer i got 120FPS average at HDMI port via DisplayLink but when the game start FPS drops to 50-60 do you have any idea why is that?
I'm using 18362.10019 but I'm still stuck when I use my nvidia card.
Do you have any solutions?
Thanks for the response. It does show the GPU is working with applications on the monitor connected through the D3100 now. I was expecting the fix/solution to allow for all (or similar) functionality prior to the Windows Anniversary update where the display adjustments and controls were accessed through "Intel Graphics Settings" or "NVIDIA Control Panel". With that in mind does the D3100 now mirror settings applied to other monitors through the Intel/Nvidia interfaces? The generic display settings are very limited; is there a way to control this monitor and how it displays (color, refresh rate, etc.) individually, similar to the Intel and Nvidia interface? This was the method prior to the anniversary update.
@Matt, application computation and displaying are two different functions which don't have to be on the same GPU. What you look at is not relevant to this discussion as that's the display, not computing of the graphics by AutoCAD, Solidworks... In this graphics model, DisplayLink technolgy is neither an application, or a GPU but a display only adapter. You can ignore that dialogue for your end product.
You should change the GPU affinity at application level, as this is where AutoCAD, Solidworks,... will decide to do their graphics computation.
In the old days, both GPUs were somewhat logically stacked, so there was less separation in them, but it resulted in very high complexity and less system graphics stability than Windows 10 offers.
hi Alban, mostly fixed. Still one programme that refuses to play ball but otherwise all seems as good as it was prior to the v1903 patch.
Maybe I'm doing something wrong, but I have a monitor connected through a D3100 that still isn't recognized by the Nvidia GPU.
System Specs: Dell Precision 5510 with Intel HD Graphics 530 and Nvidia M1000M; running Windows 10 version 1903 OS Build 18362.329. Running Laptop Built-in Display, Asus VG248QE (HDMI direct to Laptop) and another Asus VG248QE (HDMI to D3100). Latest DisplayLink drivers (as of 12:30 PST 9/3/19)
If I right-click on the screen and select "Display Settings" all three monitors are identified correctly (all three screens display also). Right-click and select "Intel Graphics Settings" only the built-in monitor and Asus screen connected directly to the laptop are shown/identified. Right-click and select "Nvidia Control Panel" same as "Intel Graphics Settings".
Prior to Windows 10 Anniversary all three were shown/identified and worked correctly (Both Asus monitors were running through the D3100). Since the update no high end applications (i.e. AutoCAD, Solidworks, etc.) work well on the monitor connected the D3100 (severe screen tearing/lag, system crash). My preference is to disable the laptop display and run the two Asus monitors through the D3100 (which worked prior to the anniversary update). All systems in our office are the same and are functioning this way. Any Ideas?
After installing the update today I tried several programs (Photoshop CC, 3D builder and Unity 3D) using GPU instead of the Intel graphics and everything works well.
My configuration is 3 monitors (2x DisplayPort, 1x HDMI) on an i-tec USB-C / USB 3.0 3x4K connected to my Dell Inspiron 15 7586.
Wasn't able to use my Dock for several month...Thanks Alban for fixing that issue.
I can confirm that the fix was distributed to Windows 10 v1903 today under KB4512941 (OS Build 18362.329). It is an Optional update in Windows Update. After applying the update, the issue is resolved. I am able to use the GPU instead of the Intel graphics.
My configuration is 2 monitors plugged into HDMI ports on a Targus DOCK180USZ. The dock is connected to my Dell XPS 15 laptop via Thunderbolt 3 connector. I have tested with several graphics intensive video games set at 1080p resolution.
Thank you Alban and the DisplayLink team for all of your hard work on this issue.
Hello, anyone installed Win10 v1903 (19H1) successfully? Everything is fine?
ryan harrison commented
Thank god I stumbled on this thread. Its been super frustrating. I've been on tech support calls with Solidworks and Lenovo looking for solutions. I saw the comment about setting the laptop as the main screen and I'm finally back in business. What seems crazy is that neither other company had a solution or heard of this issue.
Windows 1903 causes my app - Chief Architect to not work with my NVIDIA card - works with my Intel card (but that's slow!). I'll probably roll back the Windows build....
Brendan Roney commented
With advice from Alban, I have extended across 3 displays with the laptop the main display.
This has solved the issue for solidworks!
In regards to the windows insider program, my install actually failed so that is most possibly the reason this solution didn't work. Thanks to Alban for his continual support during this matter.
One of the top 3 laptop vendor has helped make the business case to Microsoft I learnt Tuesday night.
The decision for backporting should happen this week, so I expect to have a reply next Tuesday evening (UK time) during my regular synch-up with them. At that point, I will also enquire about scheduling.
Because of the nature of the bug, I expect this patch to be the 4th Tuesday of a month. It sounds too late for August.
(details on policy: https://techcommunity.microsoft.com/t5/Windows-IT-Pro-Blog/Windows-10-update-servicing-cadence/ba-p/222376)
We are experiencing crashes with both PTC Creo and Solidworks on our mobile workstations since the 1903 update. If we unplug from the dock, the applications run fine... Still waiting for the fix.
Hey @Alban could you keep update us at least once a week?
Alban, just wanted to say thanks for the ongoing updates, it hasn't notified me until today.
Hoping we're about to hit the end of this saga and make my D6000 dock worth the cost! :)