Display intermittently blanking, flickering or losing video signal

If you find one or more of the DisplayLink connected screens are going blank for about one second, then coming back on, and the windows on the DisplayLink display have not moved to another display, it is probably caused by the monitor losing sync with the video output from the DisplayLink video output. This can be caused by long, or poor quality video cables. Video cables are no different to any other cables in terms of quality. Poor quality cables can cause:
  • Signal degradation
  • Video flicker
  • Video distortion
If you are seeing such an issue please check if swapping your video cable for another resolves the issue. 

Surprisingly, we have also seen this issue connected to gas lift office chairs. When people stand or sit on gas lift chairs, they can generate an EMI spike which is picked up on the video cables, causing a loss of sync. If you have users complaining about displays randomly flickering it could actually be connected to people sitting on gas lift chairs. Again swapping video cables, especially for ones with magnetic ferrite ring on the cable, can eliminate this problem. There is even a white paper about this issue.

Issues such as those mentioned above are particularly evident in video cable converters.

If you are using a DisplayPort to HDMI, DisplayPort to DVI or DisplayPort to VGA cable and are having issues we recommend using an active video adapter in conjunction with a video cable as illustrated below:

DisplayPort output  > DisplayPort to HDMI active adapter > HDMI to HDMI cable > Monitor input
DisplayPort output  > DisplayPort to DVI active adapter > DVI to DVI cable > Monitor input
DisplayPort output  > DisplayPort to VGA active adapter > VGA to VGA cable > Monitor input

What is the difference between active and passive?

Active cables and adapters contain have their own built in chip which converts the video signal from say DisplayPort to HDMI

Passive cables and adapters do not have such a conversion chip built in. Instead they rely on the source to do the conversion.

What active adapters do you recommend?

We cannot recommend one over another but we do regularly use the following in our test lab:

DisplayPort to HDMI adapter:

DisplayPort to DVI

DisplayPort to VGA

Feedback and Knowledge Base