DisplayLink Feature Suggestions

I suggest you...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  1. Support flux by allowing color calibration

    Flux will reduce the amount of blue light emitted by the screen which aids going to bed. As it stands, there is no support for color calibration to DisplayLink connected monitors. DCC/CI commands are supported, but there are issues that make it not a viable solution (http://superuser.com/questions/257606/is-there-a-work-around-to-configure-brightness-or-color-on-a-displaylink-monitor).

    734 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      I agree to the terms of service
      Signed in as (Sign out)
      You have left! (?) (thinking…)
      104 comments  ·  Flag idea as inappropriate…  ·  Admin →

      The implementation progresses. The first products we are working on are the DL-3000 and DL-5000 series and you can have an early preview on Windows 10 Anniversary Update onwards for these devices: http://www.displaylink.org/forum/showthread.php?p=82958#post82958

      Still a lot of work to do… Please do read the limitations before you start using it and use the forum for the feedback so it can be individually tracked and answered to.

    • Increased Mouse lag since the W10 Redstone / DP Driver 8.0 Update.

      I have increased Mouse lag since the W10 Redstone / DisplayLink Driver 8.0 Update. I have a 3-screen Setup here. Surface Pro 3 + the DisplayLink USB Docking Station with 2 additional Screens. Working on those 2 external Screens got a bit tedious since the W10 Redstone / DisplayLink 8.0 Update. Maybe I´m too sensitive, but I feel enough mouse lag on the external Screens to slow down my daily work a bit. I´m using the DisplayLink Adapter since 2 years now and there were highs and lows regarding lag, but Version 7.9 on Windows 10 1511 was really good.…

      111 votes
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        I agree to the terms of service
        Signed in as (Sign out)
        You have left! (?) (thinking…)
        37 comments  ·  Flag idea as inappropriate…  ·  Admin →
      • Support for LUTs

        I have a laptop connected with an external monitor through a USB dock. It seems that DisplayLink does not support LUT as the ICC profile creation software (XRite i1Profiler) cannot complete the ICC profile creation for the secondary monitor connected through the USB Dock. The software works fine if I connect the monitor directly to the laptop HDMI port.

        7 votes
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          I agree to the terms of service
          Signed in as (Sign out)
          You have left! (?) (thinking…)
          1 comment  ·  Flag idea as inappropriate…  ·  Admin →
        • Fix some applications not running on laptop GPU

          Hi since the Windows 10 Anniversary update games or utilities i have in Steam valve dont seem to use the GPU on my laptop but instead use intel graphic the laptop i have is a Lenovo Y50

          30 votes
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            I agree to the terms of service
            Signed in as (Sign out)
            You have left! (?) (thinking…)
            8 comments  ·  Flag idea as inappropriate…  ·  Admin →
          • TrayIcon should always display if installed

            Suggestion: The DisplayLink Manager TrayIcon should show even if the hardware is not detected. In that case, it should provide links to helpful KB articles (or better yet, include the troubleshooting steps offline).

            That would have saved me about three hours of troubleshooting a 3rd-party (LizTek) product before I finally stumbled on this site.

            1 vote
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              I agree to the terms of service
              Signed in as (Sign out)
              You have left! (?) (thinking…)
              1 comment  ·  Flag idea as inappropriate…  ·  Admin →

              Thank you for the suggestion. Now in implementation on v8.0 of our drivers. This will help the debugging by telling which element of the chain is missing. Today, the icon is only visible if drivers are installed, AND a device using DisplayLink technology is connected and running AND a working monitor is plugged into it.

            • HI, Let customers decide WHEN to install new drivers. (Automatic driver update messes up my 4 + 1 monitor trading station.) Thanks.

              (the automatic updates re-arrange and resize everything on my screens causing me headache. The driver should be updater when no windows left opened / programmes running.)

              1 vote
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                I agree to the terms of service
                Signed in as (Sign out)
                You have left! (?) (thinking…)
                1 comment  ·  Flag idea as inappropriate…  ·  Admin →

                I understand this is a problem and we already have a change in behaviour for our next major release.

                This will cause the software update to happen over the next reboot, rather than immediately while you are working.

              • Don't see your idea?

              DisplayLink Feature Suggestions

              Feedback and Knowledge Base